Types and characteristics of steel grid plate
Also known as: steel plate steel grid plate, steel grid plate, hot galvanized steel grid plate, hot galvanized plate platform etc..
Steel plate is a certain distance with the flat bar and according to (Fang Gang, Fang Gang, twisted round steel, flat steel etc.) are staggered and welded into a steel products with square lattice in the middle of the steel plate is mainly used to do the ditch cover, the steel structure of the step ladder platform board, board and so on. The bar is generally used after Fang Gang twist. The steel grid plate generally uses the appearance of carbon steel, hot galvanized, can prevent the oxidation of the. Can also be made of stainless steel. Steel grid plate with ventilation, lighting, cooling, non slip, explosion-proof and other properties.
Steel plate as the advantages of steel structure platform plank: steel plate steel grid board product platform shall is a widely used, the steel plate is widely used in various industrial fields, has the strongest impact on surface resistance, especially has very strong impact resistance to lateral spacing of steel bar the ability of 50mm lattice board. For alloy, building materials, power plant, boiler, shipbuilding, petrochemical, chemical and general plant room, municipal construction and other industries, with ventilation, skid resistance, strong bearing capacity, beautiful and durable, easy to clean, installation, is a kind of new building replacement products. Can be welded in the surrounding plate (block edge board), decorative pattern plate guard, the installation of attachments and other accessories. Can be used with different specifications of the bearing flat steel flat edge, or with angle steel, channel steel, square edge; handle and hinged steel grid plate can often move or open in need on.
Steel grid plate mounting and fixing can choose two ways of welding and installing clamps.
The welding advantage is permanently fixed, not loose, the specific location of the steel grid plate in each corner of the first root steel, weld length not less than 20mm, the height is not less than the fillet welding 3mm. The advantages of mounting clip is damaging the galvanizing layer and convenient disassembly, each board requires at least 4 sets of mounting clip, clip the installation number with the increase in use increases in length. The most secure method is not to use the clip, directly to the screw head welding on the beam, to ensure that the steel grid plate will not be due to the installation of loose and off from the beam.
